TP-Link TL-WA901N
TP-Link TL-WA901N, 2.4 GHz, 450 Mbit/s, 64-bit AES, 128-bit AES, WPA, WPA-PSK, WPA2, WPA2-PSK, 10,100 Mbit/s
Reasons to Buy
Technical Headlines
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g
Multiple Operating Modes
- Easy to Build WLAN
Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported
-More Flexible Deployment
The TL-WA901N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
- 450Mbps wireless transmission rate brings smooth wireless N experience
- Supports multiple operating modes: Access Point, Range Extender, Multi-SSID and Client modes
- Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Power over Eth
Technical Headlines
- 2.4 GHz
- Maximum data transfer rate: 450 Mbit/s
- IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
- 64-bit AES, 128-bit AES, WPA, WPA-PSK, WPA2, WPA2-PSK
- Power over Ethernet (PoE)
- Antennas quantity: 3 External
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901N is designed to establish or expand a scalable high-speed wireless N network or to connect an Ethernet-enabled device such as a game console, digital media adapter, printer, or network-attached storage device to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g
Multiple Operating Modes
- Easy to Build WLAN
Supports Client, Multi-SSID, Range Extender, and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported
-More Flexible Deployment
The TL-WA901N is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
Data sheet
- AC adapter included
- Yes
- AC input voltage
- 9 V
- Antenna type
- External
- Antennas quantity
- 3
- Cabling technology
- 10/100Base-T(X)
- DC-in jack
- Yes
- Depth
- 134 mm
- DHCP client
- Yes
- DHCP server
- Yes
- Frequency band
- European Union: 2.4122.472(13 channel); 5.1805.240(4 channel); 5.5005.700(8 channel); . Ret o World (Actual channel deignated by electing country UI): 2.4122.472(13 channel); 5.1805.240(4 channel); 5.2605.320(4 channel); 5.5005.700(11 channel); 5.7455.825
- Height
- 990mm
- Input current
- 9/4.5 A
- Management protocols
- ЫТЬЗ
- Maximum data transfer rate
- 96 Gbit/s
- Minimum system requirements
- •Audio output 3,5 mm
•Microphone input 3,5 mm - Networking standards
- Plug and Play, CE, FCC Class A certified, UL, TUV GS, VCCI, C-Tick, BSMI CNS 13438 Class A
- Operating temperature (T-T)
- 8 - 35 °C
- Security algorithms
- WPS,WPS-PBC,WPA,WPS-PIN,WPA2
- Storage temperature (T-T)
- 8 - 85 °C
- USB 2.0 ports quantity
- 7
- Width
- 993 mm
- Product colour
- White,Black
Specific References
- EAN13
- 0845973099855
You might also like
TP-Link TL-WA901N, 2.4 GHz, 450 Mbit/s, 64-bit AES, 128-bit AES, WPA, WPA-PSK, WPA2, WPA2-PSK, 10,100 Mbit/s