NETGEAR M4200-10MG-PoE+
NETGEAR M4200-10MG-PoE+, Managed, L2/L3, 10G Ethernet (100/1000/10000), Power over Ethernet (PoE), Rack mounting, 1U
Technical Headlines
M4200 Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch for Wave 2 11ac AP Deployment, 8 full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G SFP+ uplinks, Halbe Bautiefe Allow for a fully non-blocking deployment of eight Wave 2 11ac access points mit 240W PoE budget, 8x2.5G to the access points and 2x10G line-rate aggregation to the wiring closet, Two of these multi-speed 1G, 2.5G PoE+ ports also support 5G speed, Multigigabit Ethernet is compatible with most major wireless and switching vendors, Multi-speed 2.5G/5G for 100 meter Cat5e/Cat6 cable runs with 1G backward compatibility, Plenum rated, slim design and mounting accessories allow to place this switch to optimize access points placement and cabling efficiency, inside and outside the rack, Lifetime hardware warranty, Lifetime Next Business Day and Lifetime online technical chat for investment protection and post-sales support, incl. umfangreichen Befestigungskit.
- Managed L2/L3
- Quality of Service (QoS) support
- Basic switching RJ-45 Ethernet ports quantity: 8 Console port: USB
- Cat5e, Cat6e 10G support
- MAC address table: 16000 entries Switching capacity: 90 Gbit/s
- 512 Access Control List (ACL)
- 1U Rack mounting Stackable
- Power over Ethernet (PoE)
M4200 Full Power PoE+ 8x2.5G and 2x10G Aggregation Switch for Wave 2 11ac AP Deployment, 8 full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G SFP+ uplinks, Halbe Bautiefe Allow for a fully non-blocking deployment of eight Wave 2 11ac access points mit 240W PoE budget, 8x2.5G to the access points and 2x10G line-rate aggregation to the wiring closet, Two of these multi-speed 1G, 2.5G PoE+ ports also support 5G speed, Multigigabit Ethernet is compatible with most major wireless and switching vendors, Multi-speed 2.5G/5G for 100 meter Cat5e/Cat6 cable runs with 1G backward compatibility, Plenum rated, slim design and mounting accessories allow to place this switch to optimize access points placement and cabling efficiency, inside and outside the rack, Lifetime hardware warranty, Lifetime Next Business Day and Lifetime online technical chat for investment protection and post-sales support, incl. umfangreichen Befestigungskit.
Data sheet
- 10G support
- Yes
- AC adapter included
- Yes
- AC input frequency
- 50 - 60 Hz
- AC input voltage
- 100 - 240 V
- Basic switching RJ-45 Ethernet ports quantity
- 8
- Basic switching RJ-45 Ethernet ports type
- 10G Ethernet (100/1000/10000)
- Cable types supported
- Cat5e, Cat6e
- Cables included
- AC, LAN (RJ-45), Mini-USB, SFP+, USB
- Flash memory
- 96 MB
- Internal memory
- ≈ 5,000 Cat 8 with plots; ≈ 12,000 Cat 6A with plots
- Latency (10 Gbps)
- 82 µs
- MAC address table
- 96000 entries
- Memory type
- SLC
- Networking standards
- Plug and Play, CE, FCC Class A certified, UL, TUV GS, VCCI, C-Tick, BSMI CNS 13438 Class A
- Noise level
- 97.4 dB
- Number of VLANs
- 8000
- Power consumption (typical)
- 9W
- Switch layer
- L7
- Switching capacity
- 993.6 Gbps
- Throughput
- VHT20, VHT40, VHT80
- USB 2.0 ports quantity
- 7
- Weight
- VFD and cable: 36.6 lb; Pole (each): 50.7 oz; Base: 66.1 lb (VFD and cable: 1.29 lb; Pole (each): 1.79 oz; Base: 2.33 lb)
- Product colour
- White,Black
Specific References
- EAN13
- 0606449111286
NETGEAR M4200-10MG-PoE+, Managed, L2/L3, 10G Ethernet (100/1000/10000), Power over Ethernet (PoE), Rack mounting, 1U