Lantronix XPress-Pro SW 92012F

Lantronix XPress-Pro SW 92012F

8 x 10/100Base-TX ports, 1 x 100Base-FX port, 2048 Mac adresses, 768 kilobit buffer, Din Rail
Out of Stock
Reference: X92012011-01
With a complete line of rugged, dependable, affordable Ethernet switches, the XPress-Pro SW series delivers a total networking solution for the industrial environment.



Part of the DeviceLinx family of network enablement products, XPress-Pro SW series managed and unmanaged Ethernet switches from Lantronix are designed to give you performance you can count on in the harsh environments often found at the edge of the network.



Whether they’re on the factory floor or in the field, XPress-Pro switches will provide flawless communication when you need it most. These full-featured Ethernet switches are the latest Lantronix innovations for the industrial automation marketplace.



XPress-Pro SW 92000 switches offer eight 10/100 Ethernet ports and an optional fiberoptic interface. They can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs to fit applications requiring a tough, environmentally hardened Ethernet switch.



- 2048 MAC addresses

- 768 kilobit buffer memory

- Redundant 2A max, 10 to 48 VDC power inputs

- Wide -34° to 74° C (-29° to 165° F) operating temperature range

- Hardened aluminum case

- Supports DIN-rail, panel, or rack-mounting installation

- Comply with NEMA TS1 and TS2 environmental requirements

- for traffic control equipment

- Alarms for power and port link failure by relay output

- UL 1604 Class 1, Division 2 classified for use in hazardous locations
Lantronix

Data sheet

10G support
No
Auto MDI/MDI-X
Yes
Basic switching RJ-45 Ethernet ports quantity
8
Certification
CE: EN55022 (CISPR22 Class A), EN55024 (CISPR24 Class A)
RoHS
ISO9001
Colour of product
Grey
Connectivity technology
Wired
Copper ethernet cabling technology
100BASE-TX,10BASE-T
Dimensions (WxDxH)
50 x 110 x 136 mm
Drive device, buffer size
0.096 MB
Electromagnetic compatibility
FCC Part 15, Class A
Ethernet LAN (RJ-45) ports quantity
8
Fiber optic connector
XFP
Housing material
Zinc steel
Input current
9/4.5 A
Input voltage
10 - 48 V
Installed ports
9
Latency
7.1 μs
MAC address table
96000 entries
Mounting
DIN-rail
Networking standards
IEEE 802.3,IEEE 802.3u,IEEE 802.3x
Operating temperature (T-T)
-34 - 74 °C
Operating temperature range (T-T)
-34 - 74 °C
Power consumption (typical)
18.48 W
Power over Ethernet (PoE) support
No
Power requirements
24 VDC, 0.55A
Relative humidity
10 - 95 %
Safety
UL 60950, EN 60950, IEC 60950, IEC 61000-6-2, UL 1604
Source data-sheet
Icecat.biz
Storage temperature (T-T)
8 - 85 °C
Storage temperature range (T-T)
-40 - 85 °C
Supported data transfer rates
x1 115.2 Kbits/sec., x2 230.4 Kbits/sec., x4 460.9 Kbits/sec
Transmission distance (max)
2 km
Wavelength
[1250 nm – 1600 nm]
Weight
800 g
Wireless LAN connection
No

Specific References

EAN13
0783384233119