Trendnet TPE-115GI Gigabit PoE+ Injector
PoE+ Gigabit Injector, IEEE 802.3at/802.3af, 10/100/1000Mbps, 100m
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations.
Data sheet
- AC adapter input voltage
- 100 - 240 V
- Cabling technology
- Cat. 5/5e
- Certification
- CE, FCC
- Compliance industry standards
- IEEE 802.3/802.3u/802.3ab/802.3at/802.3af
- Ethernet LAN (RJ-45) ports quantity
- 2
- Ethernet LAN data transfer rates
- 10, 100, 1000 Mbit/s
- Input current
- 0.65 A
- Operating relative humidity (H-H)
- 0 - 95 %
- Operating relative humidity range
- 0 - 95 %
- Operating temperature (T-T)
- -10 - 45 °C
- Operating temperature range (T-T)
- -10 - 45 °C
- Power consumption (typical)
- 30 W
- Power over Ethernet (PoE) support
- Yes
- Source data-sheet
- Icecat.biz
- Storage temperature (T-T)
- -20 - 60 °C
- Storage temperature range (T-T)
- -20 - 60 °C
- Weight
- 162 g
Specific References
- EAN13
- 0710931160031
You might also like
PoE+ Gigabit Injector, IEEE 802.3at/802.3af, 10/100/1000Mbps, 100m