32-bit 100/10M PCI adapter. This is a 32-bit adapter for using in personal computers with a Peripheral Component interconnect (PCI) computer bus to eliminate I/O bottlenecks and to reduce CPU loading using bus master architecture.
This is also a Full-Duplex adapter connected to an Ethernet network with a single connection over unshieded twisted pair (UTP) cable and can auto-sense either 10 Mbps or 100 Mbps by full auto-detection.
- Single-chip controller complies to PCI local bus specification revision 2.1
- Conforms with IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX standards
- High performance bus master architecture for low CPU and bus utilization
- Single shielded RJ-45 connector for using at either 10 or 100Mbps speed
- Single +5 V power supply operation
- On-board socket for an optional remote boot ROM
- Provides I diagnostic LED to monitor linking status
- Provides high performance network drivers such as ODI, NDIS, NDIS3
- NDIS4, NDIS5, UNIX, etc
Data sheet
- Cabling technology
- 10/100BaseT(X)
- Certification
- FCC Class A
- Connectivity technology
- Wired
- Data transfer rate (max)
- 100 Mbit/s
- Ethernet LAN
- Y
- Ethernet LAN (RJ-45) ports
- 1
- Ethernet LAN data rates
- 10,100 Mbit/s
- Host interface
- PCI
- Input voltage
- 5 V
- Interface
- Ethernet
- Internal
- Y
- LED indicators
- Status
- Networking standards
- IEEE 802.3,IEEE 802.3u
- Operating relative humidity (H-H)
- 10 - 90 %
- Operating temperature (T-T)
- 0 - 55 °C
- Package height
- 24 mm
- Package weight
- 998 g
- Package width
- 160 mm
- Source data-sheet
- Icecat.biz
- Width
- 115 mm
- Windows operating systems supported
- Windows 7,Windows NT,Windows Vista
Specific References
- EAN13
- 5052217486622