Cisco Nexus 31108TC-V
48x RJ-45, 6x QSFP, 2.16 Tbps, 1U, 64 GB SSD, 44x439x566 mm, 10 kg
Get high performance, advanced programmability, and wire-rate Layer 2 and 3 switching based on the Cisco NX-OS operating system. The 31108TC-V is a 48-port, 1/10-Gbps switch with 40/100-Gbps uplinks. Ideal for building cost-effective, power-efficient data centers, this compact switch supports DevOps toolsets. It offers flexibility, mobility, and scale for cloud and service providers.
Features and Capabilities
High Performance and Flexibility
- All ports support 1,10, 40, 100 Gbps for maximum flexibility
- Up to 2.5 Tbps and up to 1.4 billion packets per second (Bpps)
- The design is optimized for ultra-low, nominal latency (approximately 650 nanoseconds)
- Border Gateway Protocol Ethernet VPN (BGP EVPN) control plane offers scalable multitenancy and host mobility
Feature-Rich
- Native line-rate virtual extensible LAN (VXLAN) routing supports mobility and tenant isolation
- Integrates with Cisco Cloud Network Manager and XML management tools
- Includes scalable and cost-effective network traffic monitoring with Cisco Nexus Data Broker
Simple Operations
- Touchless boot-up with Power-On Auto-Provisioning (POAP)
- Configuration management DevOps tools support Puppet, Chef, and Ansible
- Advanced programmability functions include Cisco NX-API command-line interface (CLI), NX-API representational state transfer (REST), Cisco Embedded Event Manager, and Python scripting
Features and Capabilities
High Performance and Flexibility
- All ports support 1,10, 40, 100 Gbps for maximum flexibility
- Up to 2.5 Tbps and up to 1.4 billion packets per second (Bpps)
- The design is optimized for ultra-low, nominal latency (approximately 650 nanoseconds)
- Border Gateway Protocol Ethernet VPN (BGP EVPN) control plane offers scalable multitenancy and host mobility
Feature-Rich
- Native line-rate virtual extensible LAN (VXLAN) routing supports mobility and tenant isolation
- Integrates with Cisco Cloud Network Manager and XML management tools
- Includes scalable and cost-effective network traffic monitoring with Cisco Nexus Data Broker
Simple Operations
- Touchless boot-up with Power-On Auto-Provisioning (POAP)
- Configuration management DevOps tools support Puppet, Chef, and Ansible
- Advanced programmability functions include Cisco NX-API command-line interface (CLI), NX-API representational state transfer (REST), Cisco Embedded Event Manager, and Python scripting
Data sheet
- 10G support
- Yes
- AC input frequency
- 50/60 Hz
- AC input voltage
- 100-240 V
- Basic switching RJ-45 Ethernet ports quantity
- 48
- Basic switching RJ-45 Ethernet ports type
- 10G Ethernet (100/1000/10000)
- Colour of product
- Grey
- Depth
- 566 mm
- Fiber optic connector
- QSFP
- Flash memory
- 64000 MB
- Heat dissipation
- 887 BTU/h
- Height
- 44 mm
- LED indicators
- Yes
- MAC address table
- 288000 entries
- Networking standards
- IEEE 802.1D,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3an,IEEE 802.3ba,IEEE 802.3z
- Noise level
- 76.7 dB
- Number of VLANs
- 8000
- Operating altitude
- 0 - 3000 m
- Operating relative humidity (H-H)
- 10 - 85 %
- Operating temperature (T-T)
- 8 - 35 °C
- Power consumption (typical)
- 260 W
- Redundant power supply (RPS) support
- Yes
- Source data-sheet
- Icecat.biz
- Spanning tree protocol
- Yes
- Storage relative humidity (H-H)
- 5 - 95 %
- Storage temperature (T-T)
- 8 - 85 °C
- Switch layer
- L3
- Switching capacity
- 2160 Gbit/s
- Web-based management
- Yes
- Weight
- 10000 g
- Width
- 439 mm
Specific References
- EAN13
- 0882658903465
48x RJ-45, 6x QSFP, 2.16 Tbps, 1U, 64 GB SSD, 44x439x566 mm, 10 kg