D-Link  32-bit PCI. 10/100/1000Mbps autosense. Full Duplex. TP connector
  • D-Link  32-bit PCI. 10/100/1000Mbps autosense. Full Duplex. TP connector
  • D-Link  32-bit PCI. 10/100/1000Mbps autosense. Full Duplex. TP connector
  • D-Link  32-bit PCI. 10/100/1000Mbps autosense. Full Duplex. TP connector

D-Link DGE-528T

DGE-528T - PCI, Gigabit Ethernet, CSMA/CD
Out of Stock
Reference: DGE-528T
The D-Link DGE-528T is a high-performance 10/100/1000Mbps copper Gigabit PCI card for desktop PC. Installable in a PC equipped with PCI expansion slots, this card turns a desktop computer into a high-bandwidth Gigabit workstation or a server running at 2000Mbps full-duplex speed..



High-performance Gigabit Speed

Capable of running at full-duplex Gigabit speed, this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.



VLAN to Improve Performance and Security

The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance and security.



Wake-On-LAN for Power Management

Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC and allows users to initiate action at irregular times and from distant locations.



Flow Control to Minimize Packet Loss

The card's embedded flow control and independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data.



Small Form Factor, Lower Power Requirement

Using a single chip solution, this card is very small in size and consumes very little power of your computer system.

Data sheet

Cabling technology
10/100/1000BaseT(X)
Certification
FCC Class B, CE, ICES-003
Colour of product
Green
Compatible operating systems
Microsoft Windows 98, NT 4.0, ME, 2000, XP
Novell NetWare Server 5.x, 6.x
Linux kernel 2.2.x, 2.4.x
Macintosh OS X
Compliance industry standards
802.1Q, 802.3x
Connectivity technology
Wired
Data link protocols
CSMA/CD
Data transfer rate (max)
2000 Mbit/s
Host interface
x8 PCI-e 2.0
Interface
XFP
Mac operating systems supported
Mac OS X 10.2 Jaguar,Mac OS X 10.3 Panther,Mac OS X 10.4 Tiger
Networking standards
IEEE 802.1p,IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x
Operating relative humidity (H-H)
5 - 90 %
Operating relative humidity range
10 - 90 %
Operating temperature (T-T)
8 - 35 °C
Operating temperature range (T-T)
0 - 50 °C
Source data-sheet
Icecat.biz
Storage relative humidity (H-H)
5 - 90 %
Storage temperature (T-T)
-25 - 55 °C
Windows operating systems supported
Windows 2000,Windows 2000 Professional,Windows 7 Home Basic,Windows 7 Home Basic x64,Windows 7 Home Premium x64,Windows 7 Professional,Windows 7 Professional x64,Windows 7 Starter,Windows 7 Starter x64,Windows 7 Ultimate,Windows 7 Ultimate x64,Windows 98,

Specific References

EAN13
8714603001198

You might also like