Cisco SPA-2XOC48POS/RPR
2-port OC48/STM16 POS/RPR Shared Port Adapter
The Cisco 2-port, 5-port, 8-port, and 10-port Gigabit Ethernet SPAs are available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and easy upgrades. The Cisco SPA/SIP portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.
Gigabit Ethernet interfaces are commonly used for interconnecting routers or other devices within a central office or data center or in a metropolitan-area network (MAN). Cisco offers an extensive variety of 1000BASE-X Gigabit Ethernet SPAs to meet customers' needs for various applications. With Cisco Gigabit Ethernet SPAs, users can mix-and-match SPA ports with other types of interfaces in the same slot. Each SPA provides standards-based Gigabit Ethernet implementation for compatibility and interoperability.
Gigabit Ethernet interfaces are commonly used for interconnecting routers or other devices within a central office or data center or in a metropolitan-area network (MAN). Cisco offers an extensive variety of 1000BASE-X Gigabit Ethernet SPAs to meet customers' needs for various applications. With Cisco Gigabit Ethernet SPAs, users can mix-and-match SPA ports with other types of interfaces in the same slot. Each SPA provides standards-based Gigabit Ethernet implementation for compatibility and interoperability.
Data sheet
- Colour of product
- Silver
- Connectivity technology
- Wired
- Data link protocols
- Gigabit Ethernet
- Data transfer rate
- 2.5 Gbit/s
- Data transfer rate (max)
- 2560 Mbit/s
- Depth
- 184.9 mm
- Dimensions (WxDxH)
- 171 x 184 x 20 mm
- Electromagnetic compatibility
- FCC Part 15 (CFR 47), ICES 003, EN55022, CISPR 22, AS/NZ 3548, VCCI, EN55024, EN50082-1, EN61000-6-1, EN61000-3-2, EN61000-3-3
- Fiber optic connector
- XFP
- Height
- 20.3 mm
- Host interface
- CardBus
- I/O ports
- 2 x SFP
- Interface
- Fiber
- Operating altitude
- -60 - 4000 m
- Operating relative humidity (H-H)
- 5 - 85 %
- Operating relative humidity range
- 5 - 85 %
- Operating temperature (T-T)
- 5 - 40 °C
- Operating temperature range (T-T)
- 5 - 40 °C
- Ports quantity
- 2
- Power consumption (typical)
- 15.5 W
- Receiver sensitivity
- Cisco Catalyst 6500\nCisco 7600\nCisco 12000\nCisco XR 12000\nCisco ASR 1000\nCisco ASR 9000\nCisco CRS
- Safety
- UL 60950, CSA 22.2-No.60950, EN60950, IEC 60950 CB Scheme, ACA TS001, AS/NZS 3260, EN60825\IEC60825, 21CFR1040 -FDA1
- Source data-sheet
- Icecat.biz
- Storage relative humidity (H-H)
- 5 - 95 %
- Storage relative humidity range
- 5 - 95 %
- Storage temperature (T-T)
- 8 - 85 °C
- Storage temperature range (T-T)
- -40 - 70 °C
- Supported data transfer rates
- 1000/100/10
- Supported network protocols
- HDLC, PPP, RFC 2427, IPv4/IPv6, IEEE 802.17 - Resilient Packet Ring (RPR), IETF 2892 - Spatial Reuse Protocol (SRP)
- Weight
- VFD and cable: 36.6 lb; Pole (each): 50.7 oz; Base: 66.1 lb (VFD and cable: 1.29 lb; Pole (each): 1.79 oz; Base: 2.33 lb)
- Width
- 171.5 mm
Specific References
- EAN13
- 0746320924045
2-port OC48/STM16 POS/RPR Shared Port Adapter