The HP 2920 Switch Series provides security, scalability and ease of use for enterprise edge, SMB and branch office access layer deployments. A powerful HP Networking ASIC delivers low latency, more packet buffering, and adaptive power consumption to this robust Basic Layer 3 switch that supports modular stacking, 10GbE, RIP routing, PoE+, ACLs, sFlow and IPv6.
The HP 2920 Switch Series can be managed with the optional HP Intelligent Management Center (IMC) software for a single view of your entire network and is ready for the Software-defined Network (SDN) with OpenFlow support.
Data sheet
- 10G support
- Yes
- AC input frequency
- 50/60 Hz
- AC input voltage
- 100-240 V
- Auto MDI/MDI-X
- Yes
- Basic switching RJ-45 Ethernet ports quantity
- 48
- Basic switching RJ-45 Ethernet ports type
- Gigabit Ethernet (10/100/1000)
- Built-in processor
- ARM1176
- Colour of product
- Grey
- Copper ethernet cabling technology
- 10BASE-T,100BASE-TX,1000BASE-T
- Depth
- 336 mm
- DHCP server
- Yes
- Dimensions (WxDxH)
- 442.5 x 336 x 43.9 mm
- Electromagnetic compatibility
- FCC part 15 Class A; VCCI Class A; EN 55022/CISPR 22 Class A
- Flash memory
- 1024 MB
- Heat dissipation
- 399 BTU/h
- Height
- 43.9 mm
- I/O ports
- 44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+)
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; 4 RJ-45 dual-personality 10/100/1000 PoE
- Input voltage
- –36 - –72 V
- Internal memory
- ≈ 5,000 Cat 8 with plots; ≈ 12,000 Cat 6A with plots
- Latency
- < 3.2 µs (FIFO 64-byte packets)
- Latency (10 Gbps)
- 3.2 µs
- MAC address table
- 96000 entries
- Management platform
- HP PCM+; IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (RJ-45 Ethernet); SNMP Manager; Telnet; RMON1; FTP; in-line and out-of-band; out-of-band management (serial RS-232C or Micro USB)
- Memory type
- SDRAM
- Networking standards
- IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u
- Operating altitude
- 3 km
- Operating relative humidity (H-H)
- 15 - 95 %
- Operating relative humidity range
- 15 to 95 %
- Operating temperature (T-T)
- 8 - 35 °C
- Operating temperature range (T-T)
- 0 - 55 °C
- Packet buffer memory
- 11.25 MB
- Power consumption (typical)
- 487 W
- Power requirements
- 370 W of PoE+ power is available using the internal default power supply.
- Power supply type
- 1 x J9738A
- Safety
- CE Labeled; EN 60825-1 Safety of Laser Products-Part 1; FCC Part 15, Subpart B; GOST; EU RoHS Compliant; EN 55022 Class A; EN 55024: 1998; C-Tick; ICES-003, Class A; VCCI Class A; IEC 60950-1:Second Edition; IEC 60825-1; EN62479:2010; CSA C22.2 No. 60950-
- Size
- 442.5 mm (17.42 ")
- Source data-sheet
- Icecat.biz
- Storage relative humidity (H-H)
- 15 - 95 %
- Storage temperature (T-T)
- 8 - 85 °C
- Storage temperature range (T-T)
- -40 - 70 °C
- Switch layer
- L7
- Switching capacity
- 993.6 Gbps
- Throughput
- 130.9 mpps
- Weight
- 5700 g
- Width
- 442.5 mm
Specific References
- EAN13
- 0886112322526